高频燃烧红外吸收法测定铅精矿中的硫

利用高频燃烧红外吸收碳硫仪测定铅精矿中的硫含量。低硫含量(S<5%)铅精矿样品直接称样测定;高硫含量(S>5%)铅精矿样品添加稀释剂后称样测定。对样品称样量、助熔剂类型及用量等条件进行了研究,获得最佳分析条件。通过空白实验测得方法检出限为0.0010%,利用铅精矿有证标准物质进行精密度和准确度验证,方法的标准偏差在0.295%~1.3%之间,结果表明该方法精密度高、准确度好,能够满足铅精矿中硫含量的快速准确测定。     

二维金属有机框架材料的合成及电催化应用

二维金属有机框架材料(MOFs)由于具备高比表面积、 多孔性以及丰富的活性位点等优异特性而受到广泛关注, 并且在电催化领域展现出巨大的应用潜力. 研究者们已在二维MOFs的可控制备与电催化性能调控方面取得许多突破性进展, 显示出相关研究对开发高性能电催化剂的关键作用. 本文总结了二维MOFs的自上而下和自下而上合成策略以及二维MOFs衍生物的典型合成方法, 概述了二维MOFs在各尺度下的电催化性能调控策略, 并介绍了各种合成方法和调控策略在电催化中的应用. 最后讨论了该领域面临的挑战, 并对未来的发展方向进行了展望.     

Match statistics for sequence-based alleles in profiles from forensic PCR-mps kits

The first autosomal sequence-based allele (aka SNP-STR haplotype) frequency database for forensic massively parallel sequencing (MPS) has been published, thereby removing one of the remaining barriers to implementing MPS in casework. The database was developed using a specific set of flank trim sites. If different trim sites or different kits with different primers are used for casework, then SNP-STR haplotypes may be detected that do not have frequencies in the database. We describe a procedure to address calculation of match probabilities when casework samples are generated using an MPS kit with different trim sites than those present in the relevant population frequency database. The procedure provides a framework for comparison of any MPS kit or database combination while also accommodating comparison of MPS and CE profiles.     

Dielectrophoretic ultra-high-frequency characterization and in silico sorting on uptake of rare earth elements by Cupriavidus necator

Rare earth elements (REEs) are widely used across different industries due to their exceptional magnetic and electrical properties. In this work, Cupriavidus necator is characterized using dielectrophoretic ultra-high-frequency measurements, typically in MHz range to quantify the properties of cytoplasm in C. necator for its metal uptake/bioaccumulation capacity. Cupriavidus necator, a Gram-negative bacteria strain is exposed to REEs like europium, samarium, and neodymium in this study. Dielectrophoretic crossover frequency experiments were performed on the native C. necator species pre- and post-exposure to the REEs at MHz frequency range. The net conductivity of native C. necator, Cupriavidus europium, Cupriavidus samarium, and Cupriavidus neodymium are 15.95 ± 0.029 μS/cm, 16.15 ± 0.028 μS/cm, 16.05 ± 0.029 μS/cm, 15.61 ± 0.005 μS/cm respectively. The estimated properties of the membrane published by our group are used to develop a microfluidic sorter by modeling and simulation to separate REE absorbed C. necator from the unabsorbed native C. necator species using COMSOL Multiphysics commercial software package v5.5.     

Bi2WO6基光催化剂在环境和能源领域的最新研究进展

随着全球经济的快速发展与人口的日益膨胀,随之而来的能源消耗与环境污染也日益成为一个严峻的挑战.半导体光催化技术能够将低密度的太阳能转化为高密度的化学能,此外它能够通过产生活性自由基来降解空气或水中的污染物,因此在解决上述问题中具有巨大潜力,被认为是有着广阔前景的绿色无污染的能源转化和环境修复手段.在过去几十年的研究中,一些光催化剂表现出了较好的光催化活性,如TiO2和ZnO等.然而,由于它们的宽带隙,仅仅在紫外光下具有活性,这极大地限制了其对太阳光的利用.为了尽可能地利用太阳能,研究者们开发了许多具有可见光活性的光催化剂.钨酸铋(Bi2WO6)作为一种典型的Aurivillius层状钙钛矿材料,因具有独特的层状结构、良好的可见光催化活性、高的热稳定性和光化学稳定性及环境友好性等特点而备受关注.然而,有限的光吸收和光生载流子的快速复合阻碍了Bi2WO6光催化性能的进一步提高.因此,研究者们进行了大量的研究,致力于进一步增强Bi2WO6光催化剂的活性.本文对Bi2WO6基光催化剂的最新研究进展进行了系统综述.首先介绍了Bi2WO6的晶体结构、光学性质和光催化基本原理.然后,基于Bi2WO6的改性策略,包括形貌控制、原子调控和复合材料制备,重点讨论了Bi2WO6在水分解、污染物处理、空气净化、杀菌消毒、二氧化碳还原、选择性有机合成等领域的光催化应用.最后,对Bi2WO6基光催化剂当前面临的挑战和未来的发展作了展望和总结,提出了Bi2WO6光催化剂未来的一些研究方向,包括(1)大规模、精确可控地合成Bi2WO6,特别是高活性晶面、多孔结构和量子点的设计;(2)精确调控原子位置,利用先进的技术手段进一步揭示活性位点上的光催化过程;(3)发展原位表征技术来观察复合光催化剂的界面电荷动力学以及开发新型Bi2WO6基复合体系.(4)通过机械应力、温度梯度以及电场等外场的耦合提高Bi2WO6的光催化性能;(5)进一步深入研究Bi2WO6在不同领域的光催化应用,特别是在肿瘤治疗和太阳能燃料制备方面,一些新的应用如固氮等也值得探索.期望本综述能够为Bi2WO6和其他高效光催化材料的设计提供一些指导和帮助.     

On the Whitham system for the (2+1)-dimensional nonlinear Schrödinger equation

Whitham modulation equations are derived for the nonlinear Schrödinger equation in the plane ((2+1)-dimensional nonlinear Schrödinger [2d NLS]) with small dispersion. The modulation equations are obtained in terms of both physical and Riemann-type variables; the latter yields equations of hydrodynamic type. The complete 2d NLS Whitham system consists of six dynamical equations in evolutionary form and two constraints. As an application, we determine the linear stability of one-dimensional traveling waves. In both the elliptic and hyperbolic cases, the traveling waves are found to be unstable. This result is consistent with previous investigations of stability by other methods and is supported by direct numerical calculations.     

SPT optimality (mostly) via linear programming

One of the oldest results in scheduling theory is that the Shortest Processing Time (SPT) rule finds an optimal solution to the problem of scheduling jobs on identical parallel machines to minimize average job completion times. We present a new proof of correctness of SPT based on linear programming (LP). Our proof relies on a generalization of a single-machine result that yields an equivalence between two scheduling problems. We first identify and solve an appropriate variant of our problem, then map its solutions to solutions for our original problem to establish SPT optimality. Geometric insights used therein may find further uses; we demonstrate two applications of the same principle in generalized settings.     

Hα∞到Hβ∞复合算子的线性组合

设B是N维复空间C^N中的开单位球,φ_i为B上的解析自映射,H_α^∞表示定义在单位球上的加权解析函数空间.本文主要研究的是从空间H_α^∞到H_β^∞上的复合算子线性组合■的紧致性,其中λ_i(i=1,2,…,M)是非零常数.另外,根据紧致性等价条件,得出算子差分对(C_φ1-C_φ2)-(C_φ3-C_φ1)是紧致的当且仅当C_φ1-C_φ2与C_φ3-C_φ1都是紧致的算子.     

Finite-time stabilization of state dependent impulsive dynamical linear systems

The problem of finite-time stabilizing control design for state-dependent impulsive dynamical linear systems (SD-IDLS) is tackled in this paper. Such systems are characterized by continuous-time, linear, possibly time-varying, dynamics coupled with discrete-time, linear, possibly time-varying, dynamics. The continuous-time part determines the system evolution in any time interval between two consecutive resetting events, while the discrete-time part governs its instantaneous state jump whenever the system trajectory intersects a resetting set, i.e. a region of the state space assumed to be time-independent. By making use of a quadratic control Lyapunov function, the finite-time stabilization of SD-IDLS through a static output feedback control design is specifically discussed in this paper. A sufficient and constructive result is provided based on the conical hulls of the resetting set subregions and on some cone copositivity properties of the chosen control Lyapunov function. Such a result is based on the solution of a feasibility problem that involves a set of coupled Difference/Differential Linear Matrix Inequalities (D/DLMI), which is shown to be less conservative and more numerically amenable with respect to other results available in the literature. An example illustrates the effectiveness of the proposed approach.     

氧化铟锡薄膜的磁感应热声分析

基于优良导体在磁场下的涡流效应理论和固体的热声效应理论,建立了氧化铟锡(ITO)导电薄膜磁-热-声效应的理论模型,推导了导电薄膜热致发声的温度振荡和输出声压表达式。对有基底的ITO导电膜进行了磁场下的热声理论计算和实验测试,结果表明：薄膜的温度振荡值随频率呈上升趋势,与电-热-声模型相比趋势相反;薄膜声压的理论值与实验值在频域内的变化趋势基本吻合,验证了理论模型的正确性。进而,根据磁-热-声的理论模型,分析了线圈相关参数对薄膜声压级的影响,结果表明：薄膜声压级随着线圈匝数的增加而增大,随着薄膜与线圈中心距离的增加而减小,随着线圈半径的增加而减小。文中的研究结果拓展了导电薄膜在扬声器等领域的应用。